Parts & Accessories
$26.00
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Three slots for additional adjustments over the B-RAD 2 base
- Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
$23.95
Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units.
- Fits up to 1-inch handlebars
$18.95
Fast and easy attachment of Topeak handlebar bags.
- Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)
$12.00
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames).
- If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
$38.00
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options.
- Fits tubes 20-60mm.
- Engineering grade polymer
- 64 mm mounting height adjustable
- Weight: 128g
- Max load: 3kg / 6.61lb
- Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
$39.95
Allows Thule Yepp Maxi to be installed on a bike with a rear rack with a load capacity of at least 35 kg/78 lbs and the ability to carry seat and bike bags.
Features:
- Fits rear racks measuring 11-17cm/4.5-6.7"
- For use on rear racks with a load capacity of at least 35kg/78lbs
$20.00
The Rando Pocket is an accessory bag fit to carry a small repair kit, wallet, keys, a cell phone, or a small point-and-shoot camera. Designed as the perfect match for our most revered bicycle bags, the Rando Pocket attaches to our Kestrel Handlebar Bag, Ardea Pack, and Anchor Hip Pack, and mounts to the Wald 137 Front Basket to upgrade any kit.
The Rando Pocket is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 1 plastic bottle rescued from ocean beaches.
Add versatility to your favorite set-up: The Rando Pocket weaves securely onto the Wald 137 Basket using standard MOLLE attachment and feeds onto our Kestrel Handlebar Bag, Anchor Hip Pack, and Ardea Pack to add space for your small belongings. The Rando Pocket is padded to protect your point-and-shoot camera and is the ideal pouch to keep repair supplies at arm's reach. Because the attachment mechanism is universal to the MOLLE system, our Rando Pocket is the perfect addition to any bag that features MOLLE webbing.
Cool Features:
- MOLLE attachment
- Single-handed closure
- Fully padded with closed-cell foam
Attaches to the following bicycle bags:
- Kestrel Handlebar Bag
- Ardea Pack
- Merlin Randonneur Bag
- Anchor Hip Pack
Dimensions:
- Measurements: 5.25"h X 4"d
- Capacity: .8L
- Weight: 2oz
Built with:
- Recycled ECOPAK™ EPLX400
- Packcloth
- Closed Cell Foam
- Nylon Webbing
$20.00
Suitable as a tourniquet or stylish headband in a pinch, the Whip Lash's primary function is to help you attach whatever needs attaching to your bicycle frame.
Available in a multi-pack that includes two 550mm lashes and one 695mm lash, the Whip Lash's potential is limited only by your imagination. You could use one to strap your beverage to the down tube when the trail says you ought to keep your hands on the bars. Or you could use another to fix your fishing gear to the top tube when rack space is maxed out. Whatever you get into on or off the bike, they're handy to have around because they're light, compact, and easy to use.
Rubberized on one side to keep your stuff from slipping around, the Whip Lash's trimmable design features nylon construction and a simple hook-and-loop style closure.
$15.00
Are you trying to carry an oddly-shaped item on your rack? Sunlite's Bungee Cargo Net will secure it for the ride home. It is 13 x 13 inches in size and the 4 vinyl coated hooks help secure it to your rack.
$16.00
Stash your ride snacks, repair kit, or other ride essentials in this secure and stylish KEG.
- Fits in standard bottle cages
- Keeps contents secure and dry
- Matches Salsa Dawn Patrol socks, bottle, and hat
$15.00
The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level.
- 32mm diameter clamping area for lights
- Attaches with two M5 bolts and a steel backing plate
- Mounts on left or right side
$8.00
Elliptical rail for lower anchoring hook (incl. screws) and all models with QL2 including Classic Panniers from 2007+
$22.00
Make sure you know where you're going when you mount Ortlieb's Map Case for the Ultimate5 (sold separately) on your handlebars. It mounts seamlessly to the Ultimate5's snap attachment points, a tight closure keeps weather out, and the tear-resistant fabric provides longevity.
$10.00
For all models with the QL2.1 system.
Planning a long bike tour and interested in playing it safe when it comes to securing your panniers? No problem. The screw set will help you make sure you'll be able to continue your tour with no loss of waterproof performance even if a few screws go missing.
DETAILS:
- 10 screws
- 10 nuts
$5.50
For all models from 1999
Need to replace a defective buckle?
DETAILS:
- 1 plastic, side-release buckle
$26.99
The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle.
- On-bike storage solution
- Inner sleeve to compress the tube
- Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc.
- Wide strap and durable metal buckle
- Silicone and rubber grip for stability
- Compact and lightweight
- Attach under the seat or other locations on the bike frame
- Weight 4oz
$11.95
These handy adapters are for mounting a rack on bikes where clearance is needed for disc brake calipers or other accessories.
- Screw them into the same holes on the dropouts for rack or fender bolts
- Made from special hardened aluminum stock with a threaded steel insert
- Best when only torqued to the same degree as rack bolts
- Pegs are about .75" long
- Can be used single sided or double sided
- Sold in Pairs
$12.00
Jandd Mono-Stay Rack Adaptor is used for bikes that have a wishbone-style configuration on the rear end.
$4.50
The Jandd Reflector Mount allows riders to attach a reflector to a rack.
$12.99
Keep your cargo where you go.
Hold everything in place to make sure you arrive with what you left with.
This elastic band includes hook clips to secure cargo to the rear rack (sold separately).
Help keep your cargo in place.
- Elastic band with hook clips to secure cargo to rear rack (sold separately)
- Fits all Electra rear racks
$9.99
Like a seatbelt for your stuff
This elastic net holds everything in place to make sure you arrive with what you left with.
Reflective elements provide added safety, and it fits on all Electra baskets (sold separately).
Help keep your cargo in one place.
- Includes four hooks
- Reflectivity added for safety
$12.99
Electra's Seatpost Clamp w/Rack Mounts is the crucial link between your bike and your rear rack. It replaces the standard seatpost clamp to allow rack installation on bikes not originally fitted with rack eyelets.
$14.99
- Expands up to 2x size to securely grip any shape
- Weatherproof material will not deteriorate
- Molded non-scratch hooks
$8.00
Original replacement parts for your Bontrager rack.
Details:
- For use with any post-2009 BackRack
- Easy to install
$24.99
A carrier plate that easily mounts to most racks to add the versatility of the MIK rack and bag system.
Add versatility to your rack with MIK
The adjustable-width MIK (Mounting Is Key) Carrier Plate mounts easily to most racks, giving you all the benefits of MIK's unique keyed install system. This adapter allows you to secure MIK-compatible bags to your rack to help deter theft while ensuring it's still easy for you to remove them when you need to. Hardware included.
Product details
- Adds MIK compatibility to traditional bike racks
- Securely mounts with just four bolts
- Adjustable mounting width from 100mm to 170mm to fit most racks
$10.00
Built from tough seatbelt webbing and a thick elastic strip, this cargo strap makes it easy to secure your gear. Use it a thousand different ways to make sure whatever you’re carrying stays with you all the way.
$19.99
Compatible with:
- Outpost Front Rack
- Barrier Rear Pannier
- Barrier Universal Pannier
- Central Rear Pannier
- Central Shopper's Bag Rack
- Local Rear Pannier
- Local Grocery Pannier
*Bottom hook not needed on the Local series.
$38.00
- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only)
- Compatible with luggage carriers from 80 up to 150 mm
- Carrier plate for rear racks that are not MIK ready.
- Adapter plate for bicycle rear bags that are not MIK ready
- Suitable for e-bikes
- Max load: 26lbs/12kg
Page 1 of 1