Cables

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Steel cable noodle with alloy end caps - Includes plastic liner

- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends

- Routes cables underneath the bottom bracket - Will not rust or corrode

- Sold in pairs - Allen wrench included

- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert

For proper assembly. - Fits any Trek frame with open groove guide design - For specific compatibility concerns, please contact our Customer Service team

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

- Replacement front cable hanger - Steel construction - Includes barrel adjuster - Steerer Diameter: 25.4mm

London Mod cable adapter for routing dual cables.

- Teflon-coated stainless steel inner wire - Includes cable, housing, ferrules, and cable tips - Cable length: 2100mm - Housing length: 1800mm - Use: Front or Rear - Length: 2100mm - Diameter: 1.5mm - Style: BMX/MTB

- Wet or muddy condition cable sealing solution - 4/6mm

- Complete cable kits for internal three-speed hubs

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

Housing liner provides an extra line of protection between cables and housing. - Bridges gaps between housing segments

Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.

Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Frame Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - Double-ended SRAM/Shimano mountain and road compatible cable ends - Stainless steel construction resists corrosion - Double Ended: Yes - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Defined Color: Silver - Quantity Included: 1

In-line cable tension adjusters - Indexed fine-tuning allows you to feel each "click" of adjustment and prevents loosening from vibration - Fits cable housing without ferrules

Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.

Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.

Alleviate brake cable alignment and tangles with Origin-8's Rear-Mount Cable Hanger. Made from forged aluminum, it mounts to most brake bridge mounting holes and is great for solving tricky cantilever brake set up problems. - Forged aluminum construction - Mounts to most frame mounting holes - Great for tricky cantilever brake setups - Lightweight design

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.

Box One Linear Brake Cable Kits are among the most advanced BMX brake cables on the market. The custom Concentric housing includes aramid fiber-wrapped aluminum/steel linear wires for the best combination of strength and low weight. The inner Nano Cable wires are treated with a PTFE coating that reduces friction and boosts braking performance. Our anodized aluminum Kollars ferrules further reduce cable drag. Each cable kit includes 79 inches of Concentric Linear housing, a black PTFE-coated Nano Cable, four alloy Kollars ferrules and one color-matched and one black alloy cable end caps. Available in chrome, 14K gold, red, blue and black with alloy Kollars ferrules and end caps.

Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.

Mountain Pro kits offer both enhanced performance and style. But unlike Road Pro Kits, shift and brake systems are sold separately. Teflon-coated cables used with our Slick-Lube liners dramatically reduce friction while compressionless shift housing delivers smooth, precise shifting performance. And, with all the needed parts included, our Mountain Pro kits are easy to install. - Teflon-coated cables, Slick-Lube liners, and compressionless housing enhance performance - Designed to keep gunk out - enough housing for continuous runs, including seal liners if a bike has stops - A step above standard OEM cables and housing - Mountain Pro Shift kits are available in colors that match Jagwire Mountain Pro hydraulic hose kits What's Included: 1 3200mm LEX-SL Shift Housing 1 1500mm Teflon-Coated Front Shift Inner Cable 1 2300mm Teflon-Coated Rear Shift Inner Cable 3 Sealed Alloy End Caps 6 Lined Alloy End Caps 2 Hooded Alloy End Caps 2 Cable Tips 2 4G Tube Tops 6 Cable Donuts 2 Rotating Hooks 1 2100mm Sealing Liner