Chainrings

Shimano Sora 9-Speed replacement chainrings gets your drivetrain operating smoothly again.

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Shimano Ultegra 6700/6750 10-Speed Chainrings - Material: Aluminum - Ring Position/Type: Inner - Chainring BCD: 130

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Shimano's Ultegra 6800 chainrings provide confidence-inspiring shifting and category-defining speed. Cold-forged aluminum comprises these super-stiff, hollow outer rings, and Shimano's unique system of ramps and pins means lightning fast shifts are at your command. - Bolt circle diameter: 4-bolt 110mm asymmetric - 50T pairs with 34T inner ring - 52T pairs with 36T inner ring - 53T pairs with 39T inner ring Inner rings sold separately

Shimano Ultegra R8000 Series Chainrings are designed for use with Shimano's 11-speed Ultegra crankset.

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition. - For use with 38t AM-type outer ring

Pair Shimano's 1x11 XTR chainring with an XTR rear derailleur and experience a simple, light drivetrain with exceptional chain management. A range of chainring sizes lets you customize your drivetrain for any terrain.

Mud and moving parts are enemies in the sport of cyclocross. That's why SRAM decided they were going to simplify things. Remove the front derailleur, increase the range of the cassette, make dropped chains a thing of the past, and you've got a cross drivetrain worthy of hammering. SRAM's CX1 X-Sync Chain Ring is an integral part of that system. It mates to 110 BCD cranks and features a wide-narrow-wide tooth profile to securely hold the chain through the roughest terrain. It's also specially designed with mud clearing in mind to keep your rig light and fast. A variety of sizes ranging from the spin-to-win 38T to the flat-out 46T let you dial in your rig for your strengths or course.

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. Shifting pins and ramped teeth deliver precision shifting, too.

64BCD chainring for MTB cranksets

Original equipment on SRAM and Truvativ cranks, they also work well with other drive trains. - Supplied in TruVativ packaging - No retention pin, use with guard

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

Designed with ROTOR's oval chainring shape to take full advantage of your strongest pedaling point, the Direct Mount Oval chainring helps you get the most out of every trail ride and enduro race with less overall effort and fatigue required. This oval chainring is direct-mount compatible with Rotor R-Hawk and R-Raptor cranksets designed specifically for 1x drivetrains on all-mountain and enduro bikes. It's fully compatible with all modern groupsets, ranging from 9-speed through 12-speed drivetrains, giving you the perfect excuse to ditch your old 2x drivetrain for the efficiency gains and weight savings of a 1x set-up. Wide-narrow teeth mean you won't have to worry about the chain falling off, especially if you choose to ride without a chain guide. This oval chainring is CNC machined from 7075-T6 aluminum for a simplified design that saves approximately 40 grams compared to the ring, spider, and bolt combo you'd need with a more traditional chainring and crankset. This design also improves overall rigidity for powerful pedaling, as well as giving it slight advantages in the aero department. - 7075-T6 aluminum for optimal strength-to-weight - Oval chainring shape reduces the "dead spot" in pedal stroke - Direct-mount with ROTOR Kapic, INpower, 2INpower, RHawk, RRaptor cranksets - Semi-aero design improves rigidity and aerodynamics - Wide-narrow teeth for chain retention with 1x set-ups - Optimum Chainring Positioning personalizes to your pedaling - Compatible with 9, 10, 11, 12, and 13-speed groupsets (including SRAM AXS Eagle). - Weight: 51g per 32t

12 Good Reasons If you're looking for a bomber new chainring that can run with your Shimano 12 speed drivetrain, then look no further. This direct mount ring has the versatility of RF CINCH integration and the stiffness to turn all your "push" into straight-up "go". Built to Last Created from 4mm-thick 7075-T6 alloy plate for big-time stiffness and strength. Its NW tooth profile is Shimano 12-speed specific and provides secure chain retention All-Round Performer The Race Face CINCH interface makes this direct mount chainring fast and easy to swap for different sizes to customize your Shimano 12-speed drivetrain. - Compatible with Cinch Direct Mount Cranks - 7075 Aluminum - Direct Mount

Race Face Cadence Ring Set • 53 and 39-tooth rings • Compatible with Race Face Cadence cranks • Compatible with SRAM Red, Force, Rival, Apex, S900, S500, S300, S100 • Compatible with TruVativ Rouleur, Elita • Compatible with Shimano: All older, narrower spaced versions of 130mm BCD 10-speed road cranks, Dura-Ace: FC-7800 and older, Ultegra: FC-6600 and older, 105: FC-5600 (2011 and older), Tiagra: FC-4600 (only), Non-series: R550 (only) • Compatible with SRAM / Truvativ All 130mm BCD double road 10-speed cranksets, all years except Red 2012

Race Face Next SL Direct Mount Chainrings • 7075-T6 aluminum, aerospace grade strength • Compatible for 9, 10, and 11 speed • Narrow Wide tooth profiling ensures ultimate chain retention • Attaches as part of the Race Face CINCH system (using tool TL6800) allowing you to switch between Direct Mount rings/spiders with ease • Utilizes Race Face proprietary spline design • Stiff 4mm plate thickness to transfer loads without flexing • 41 grams (26T) ranging up to 82 grams (36T) • Compatible with Race Face cranks with CINCH system interface

Race Face Light Bash Guard Chainring Guards - Machined from AL-7075 - Compatible with all current and older Race Face cranks - Designed to protect your middle and inner chainring from impacts - Manufactured from bombproof, heat treated aluminum - CNC profiling gives a 25% weight savings over 'cookie cutter' bash rings - 4 bolt (104 BCD) configurations to cover rings from 32T through 40T

RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH, and everything in-between. - 7075-T6 aluminum, aerospace grade strength - Compatible with 9, 10, 11 and 12 speed - Stiff 4mm plate thickness and I-beam construction transfer loads without flexing - Reversible laser etched graphics - Non-threaded bolt holes

Direct Mount 3-bolt chainrings compatible with SRAM cranksets with a removable Spider. Narrow Wide tooth profiling ensures ultimate chain retention. - 7075-T6 aluminum, aerospace grade strength - Stiff 4mm plate thickness to transfer loads without flexing

• CNC machined from 7075-T6, one of the strongest alloys available today • Outer rings are made from 4mm thick material & inner ring from 5mm thick material for unsurpassed durability • Rings feature our patented S.H.I.F.T. technology, featuring hard-wearing steel S.H.I.F.T. chips for dual action up-shifts

The all new Turbine 11 Speed rings are ready to ride. Completely redesigned from the ground up, these rings shift like nothing else. The Turbine rings are machined from 7075 aluminum, so they are built to last. Rings are CNC'd from 7075 alloy, creating a ring with instantaneous smooth and quiet shifting, even under load. These 2x rings are super stiff at a minimal weight, resulting in a ring that demonstrates sharp and quick shifts while being highly resistant to impacts.

Origin-8's Alloy Classic Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with road, fixie and track drivetrain components. They have an attractive and corrosion-resistant silver anodized finish.

Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.

Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.

Origin-8's BMX/SS/Fixie Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with BMX, fixie and track drivetrain components. They have an attractive and corrosion-resistant anodized finish.

Origin-8's BMX/SS/Fixie Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with BMX, fixie and track drivetrain components. They have an attractive and corrosion-resistant anodized finish.

Narrow/Wide tooth design for chain retention on 1x systems - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy