Derailleurs

Dimension Chainstay Mount Single-Speed Tensioners - Fits stays with diameters from 19.8-22.2mm - 74g

K-Edge Cross Single adds additional protection to a single ring set-up by preventing the chain from jumping up or off the ring. - Eliminate chain-drop due to rough terrain - For use with single chainring cranksets - Clamps and adjusts independent of front derailleur - Chain catcher pad is shaped to allow for 'bottom' chain derailment without chain drop when back pedaling is necessary for foot adjustment and will re-align the chain when forward pedaling is resumed - Use with a chainring guard for maximum chain control - Compatible with framesets that allow for a 'low' mounting position (minimum of 53.2 mm from the bottom of the cross clamp to the center axis of the crank spindle is required for a 32T chainring)

M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs. - Robust composite and steel construction - Compatible with Shimano 6- and 7-speed mountain and road systems

R8 front derailleurs feature a cold forged aluminum body and are optimized for 7 and 8-speed chains and Shimano-compatible road shifters.

R10 front derailleurs work with 10-speed Shimano-compatible road shifters. Designed to work with a variety of chainring combinations, these workhorse components will get you rolling again. - Cold-forged aluminum body

M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. Marvo LT rear derailleurs are built with precision rigid aluminum construction. Let these miracle workers get any bike rolling again. - Lightweight aluminum construction - Steel pulley cage for extra chain-rub durability - Compatible with Shimano 7, 8, and 9-speed mountain and road systems

R-series rear derailleurs are designed to work with Shimano-compatible road shifters. These R9 rear derailleurs combine compatibility, weight savings, and a robust design. - Weight-saving aluminum bracket body and outer link - Steel pulley cage for extra chain-rub durability - Compatible with Shimano 9 and 10-speed road systems - Not compatible with Shimano Tiagra 4700 road system - Short cage for double crankset 28T max cog setup - Medium cage for double crankset and 34T max cog - Long cage for triple crankset and 28T max cog

The heart of this microSHIFT Acolyte derailleur is the innovative SpringLock system. By pairing a customized linear rate high tension spring and a dual stage activation mechanism, we’ve developed a system that can provide substantial chain security when you need it and can be turned off when you don’t.  To engage the clutch, turn the engagement bolt clockwise until it clicks. There’s no way to overtighten the bolt. To disengage the clutch for wheel removal, flip the switch. It’s that simple. - Innovative SpringLock chain retention keeps chain in place over rough terrain - Direct path cable routing for smooth and responsive shifting - Compatible with 12-42T and 12-46T 8-speed cassettes - Compatible with Acolyte shifters only

XLE Rear Derailleur for 10-speed Shimano drivetrains - For MEGA Sprockets w/large cog size 36-42T - Compatible with single, double, or triple cranksets - Total Capacity: 47T

Arsis is the pinnacle of microSHIFT's road component line. Featuring a cold-forged aluminum bracket and carbon outer link, this front derailleur delivers precise shifting under pressure. - Precisely designed cold-forged bracket for smooth, accurate shifts - Stiff lever arm for quick response - Designed for 43.5mm chainline - Chainstay angle: 61-66° - Compatible with Shimano 11-speed road systems

Arsis is the pinnacle of microSHIFT's road component line, delivering precise shifting under pressure. - Carbon outer link with stiff and precise response - Sealed bearing pulleys - Compatible with Shimano 11-speed road

SRAM's X3 Rear Derailleur is ready for adventure. Its composite and steel construction is tough, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.

SRAM's X-7 Front Derailleur is stiff, light and strong. It provides crisp, precise action for fast, smooth and reliable shifting season in and season out.

SRAM's X7 Front Derailleur is stiff, light and strong. It provides crisp, precise action for fast, smooth and reliable shifting season in and season out.

SRAM's X9 Front Derailleur sports a forged-aluminum cage and a cutout design for exceptional durability with minimal weight. It provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.

SRAM's GX 2x10 rear derailleur provides incredible shifting speed and precision. Exact Actuation technology eliminates slop and shifting variation. Roller Bearing Clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with Cage Lock technology, wheel removal and installation are easier than ever.

The SRAM Rival 1 X-Horizon rear derailleur is engineered for smooth, reliable shifting action—from the larger upper pulley offset to the 12-tooth X-Sync pulley wheels. By eliminating unwanted chain movement, X-Horizon shifts faster, puts an end to ghost shifting, and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. • X-Horizon design reduces shift force while eliminating ghost shifting and chain slap • 12-tooth X-Sync pulley wheels • Large upper pulley offset automatically adjusts chain gap • Sealed cartridge bearings Aluminum cage • Technologies: X-Horizon, Exact Actuation, X-Sync, Roller Bearing Clutch, Cage Lock • Medium cage: 11-26 through 11-36 cassettes • Long cage: 10-42 cassette

Incredibly fast, astonishingly quiet and impressively precise — fly through all 11 gears with SRAM's Force 22 Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted chain pulley cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. A carbon outer cage, aluminum inner cage, and magnesium inner link keep the Force 22 at a svelte 178 grams.

This new NX Eagle derailleur features the proven SRAM 1x-specific X-HORIZON design. The larger, 14-tooth X-SYNC lower pulley easily facilitates 11- to 50- and 10- to 50-tooth cassette capacity, and also adds to NX Eagle's overall smooth-pedaling feel. The Type-3 ROLLER BEARING CLUTCH provides quiet, consistent performance and durability. - Eagle technology provides an expanded, optimum, gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents - Eagle is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. We guarantee this performance when Eagle drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact. - Completely new rear derailleur incorporating our proven X-HORIZON design and new Type-3 ROLLER BEARING CLUTCH technology - Eagle ecosystem-engineered mounting system and CAGE LOCK positioning add robustness - Eagle pulley technology provides greater efficiency, crisper shifting and quieter operation - Speed (RD): 12s - Cable pull ratio: X-actuation - Cage (RD): Long - Max tooth: 50 - Color (RD): Black - Pulley bearings material: Steel - Cage material (RD): Steel

SRAM’s Apex 1 drivetrain provides the gear range and the shifting simplicity to let you simply go where you want. The Apex 1 rear derailleur makes that gearing choice a reality with clean, crisp shifts, thanks to SRAM’s X-Horizon geometry and their Roller Bearing Clutch. - X-Horizon design reduces shift force, eliminates ghost shifting and chain slap - Compatible with 10-speed and 11-speed SRAM 1x road systems - With Cage Lock technology, wheel removal and installation are easier than ever - Equipped with Roller Bearing Clutch - Large upper pulley offset automatically adjusts chain gap - Weight: 314 grams - Outer Cage: Steel - Compatibility: 10-speed and 11-speed SRAM 1x road systems - Inner Cage: Steel - Cage Size: Long - Max Tooth: 42t - Pulleys: Sealed cartridge bearings - Pull: Exact Actuation

Hear the wind rushing past, the crunch of knobbies biting into dirt and the buzz of your freehub with SRAM's X9 Rear Derailleur. SRAM's Type 2 technology eliminates chainslap, derailleur bounce, and other drivetrain racket. The roller bearing clutch keeps the chain tensioned for consistent shifting and is virtually maintenance free. The tech continues with an aluminum/composite construction, SRAM's 1:1 actuation ratio and direct cable routing for quick, reliable shifts. Plus, the Cage Lock feature gives you super easy rear wheel removal and installation.

Incredibly fast, astonishingly quiet, and impressively precise — fly through all 11 gears with SRAM's Force 22 WiFLi Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. A carbon outer cage, aluminum inner cage, and magnesium inner link keep the Force 22 WiFLi at a svelte 190 grams. The WiFli version shifts up to a 32T max cog for a super-wide gear range.

SRAM's GX 1x11 X-Horizon rear derailleur is engineered for smooth, reliable shifting action—from the larger upper pulley offset to the 12-tooth X-Sync pulley wheels. By eliminating unwanted chain movement, this X-Horizon rear derailleur shifts faster, puts an end to ghost shifting, and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. • Long cage • X-Horizon design reduces shift force, ghost shifting, and chain slap • 12-tooth X-Sync pulley wheels • Large upper pulley offset automatically adjusts chain gap • Sealed cartridge bearings • Aluminum Cage

Leveraging the legendary history of SRAM shifting, the GX 2x11 rear derailleur provides incredible shifting speed and precision. X-Actuation technology eliminates slop and shifting variation while SRAM's roller bearing clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with SRAM's Cage Lock, wheel removal and installation are easier than ever. • X-Actuation for precise and dependable 11-speed performance • Focused chassis design for all conditions and usage • 10-42-tooth wide range cassette compatible

SRAM's Force WiFli Rear derailleur is made for wide-range 2x10 systems. Its long cage can handle an 11-32 cassette! You get the huge gear range of a triple with reduced weight and better shifting. Of course, the WiFli still uses SRAM's renowned Exact Actuation technology for precision shifts every time. Plus, the Force is crafted with cutting-edge materials, such as a super-light carbon cage and a magnesium inner link for feathery low weight, flawless shifting and reliability.

If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The Rival XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - 1x specific for use with 10-44T XPLR and 10-36T cassettes - SRAM AXS enabled, allowing easy personalization - Chain management keeps the drivetrain quiet and secure - Large X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries - Cage Material (RD): Aluminum - Pulley Bearings Material: Steel - Max Tooth: 44 NOTE: Does not include eTap battery. Compatible with existing eTap batteries.

Riders want a derailleur that shifts on command, whether under climbing load or sprinting to the stage finish. The GX Eagle AXS derailleur gets it done with everything you have come to expect from our AXS connect components. The GX Eagle AXS derailleur is smart enough to protect itself thanks to its incredibly resilient Overload Clutch. Engineered with a variety of rider preferences in mind, it is compatible with our new expanded range 10-52t cassette as well as our 10-50t cassette. Showcasing its lineage from the proven GX Eagle mechanical line, the GX Eagle AXS derailleur is there for one thing: to do the job. Features - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - Overload Clutch protection - Finished with the GX Eagle master colorway - Battery sold separately Specifications - Speeds: 12 - Cage Material: Steel - Pulley Bearings Material: Steel - Max Tooth: 52

The SRAM GX Eagle AXS upgrade kit is your entry point into wireless drivetrain simplicity. Compatible with any of the SRAM Eagle ecosystem cassettes and crank arms, the upgrade kit allows you to experience AXS without needing to buy an entire groupset, provided you already are using Eagle products. No matter if you are looking to upgrade your ride, or looking for great value replacement parts, look no further than the GX Eagle AXS upgrade kit. - Includes the SRAM GX Eagle AXS rear derailleur with battery, Eagle controller with clamp, charger with cord, and chain gap tool - The GX Eagle AXS rear derailleur shifts on command, whether under climbing load or sprinting to the stage finish, and is smart enough to protect itself thanks to its incredibly resilient Overload Clutch -Rear derailleur is compatible with 10-50t and 10-52t cassettes - The GX Eagle AXS controller offers a unique wireless shifting experience with ergonomic touchpoints that are customizable to your preferences - you can choose what each button does through the AXS App

The Shimano Tourney TX800 front derailleur offers precise shifting with HYPERDRIVE technology for 3x8 speed drivetrains. - Action: TOP SWING - Angled clamp band design - Applicable Top-Mid tooth difference: 10T - Chain line: 47.5/50mm - Chain stay angle: 66-69 - Top gear teeth: 42T/48T - Total capacity: 20T

Shimano FD-M2000 front derailleurs feature Mega Lite and HyperGlide technologies for smooth and easy operation. They're a perfect replacement for your 3 x 9 drivetrain.