Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

$5.00
Replacement indicator chain for three speed Sturmey Archer hubs.
$24.99
- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install
$33.95
Stan's All Mountain 29er Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
$24.00 - $26.00
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
$15.50 - $27.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
$18.00 - $24.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
$120.00
Stan's ZTR Alpha 400 Rim lets you enjoy the advantages of a tubeless setup on your road and cyclocross bikes. At only 350 grams, it's light, strong, and it features a semi-aero profile for quick accelerations and blazing speed. The Alpha rim also uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction. And this version can be used with rim brakes as well as disc brakes.
$120.00
Stan's ZTR Alpha 340 Rim lets you enjoy the advantages of a tubeless setup on your road and cyclocross bikes. At only 350 grams, it's light, strong, and it features a semi-aero profile for quick accelerations and blazing speed. The Alpha rim also uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction.
$88.00
Stan's Iron Cross Rims are their answer to the mud and madness that is cyclocross. Stan's renowned tubeless system and Beat Seat Technology provide lower tire pressures, more volume, and superior cornering traction. These super low-profile, disc-only rims feature a semi-aero profile and low weight to help you sprint out of the corners and gap the pack.
$46.49 - $86.99
Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher
$79.99
Spank's Spoon 32 rims are gravity rims done right! If your rides encompass big hits and fast descents then a pair of Spoon 32 rims might be just what you need to tackle your favored terrain. - Six Series aluminum alloy - Disc specific rim - Tubeless Ready
$39.99
Shimano's 105 Front Hub is an excellent beginning to a strong, light front wheel. The diamond-polished bearing races mean the hub rolls super smoothly and the labyrinth seals shut out dust, dirt and water. Plus, the cold-forged-aluminum hub shell is beautiful and built to last. You get Shimano's excellent quick-release skewer, too.
$125.00
Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g
$4.00
Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!
$39.99
Shimano's Deore Front Hub offers durability and fast, smooth riding. It features a high-quality cold-forged aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's easy-to-use Center Lock disc mount. This hub is compatible with 15mm through-axles for front end stiffness for pinpoint steering.
$65.00
Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams
$26.99
Shimano's Tiagra Front Hub is the durable, lightweight heart of a fast everyday front wheel. Super-polished cups and cones house ultra-smooth stainless steel bearings to minimize rolling resistance, and the hub's oversize aluminum shell builds into a stiff, responsive wheel. Adding to that, Shimano's labyrinth seals shut out dust, dirt and water for phenomenal durability.
$19.99
- Replacement rear wheel skewer. - Specifically designed for use with Saris trainers. - Can be used for both indoor and outdoor rides.
$88.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
$48.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's X7 hubs will leave a smile on your face. An aluminum hubshell with machined flange grant the hubs a low weight without compromising durability. Tough cartridge bearings roll smooth for the long haul and strong steel axles hold up under pressure, just like you.
$56.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's X7 hubs will leave a smile on your face. An aluminum hubshell with machined flange grant the hubs a low weight without compromising durability. Tough cartridge bearings roll smooth for the long haul and strong steel axles hold up under pressure, just like you.
$62.00
SRAM's X9 hubs are built tough with light aluminum hubshells for the strength to tackle the mountain year after year. You'll love the durable high-precision cartridge bearings that spin smoothly in all conditions and the strong steel axles that are built to hold up under pressure. Plus, careful machining helps keep the X9's weight low without compromising durability.
$79.99
SRAM's X9 hubs are built tough with light aluminum hubshells for the strength to tackle the mountain year after year. You'll love the durable high-precision cartridge bearings that spin smoothly in all conditions. Plus, careful machining helps keep the X9's weight low without compromising durability.
$58.00 - $65.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
$2.99 - $3.00
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
$19.99 - $24.99
Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork.
$119.99
- 6 pawl/54 point/6.6-degree engagement - Cassette bodies for Elite Series CX/GX/MT/FB-1110 hubs - Sealed bearings
$6.00
- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O
$6.00
- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O
$65.00
• Aluminum hub body • Quick release • 100mm OLD • 20, 24, 28, 32, and 36-hole spoke drilling • Black or Silver