Other
$7.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$9.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$10.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$12.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$34.00
High-quality replacement headset bearings are smooth like butter.
- Sealed cartridge bearing for long life
- Durable steel bearing housing
$26.00
Rebuild seal kits for Fox rear suspension service and repair.
- Includes parts needed for rebuild
$2.19
FSA Mega Exo Small Parts.
$6.00
Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.
$11.00
- Mega Exo right hand threaded (RH) hollow carbon screws with a self-extracting cap
- Designed to fit FSA MegaExo Cranks only
- Includes bolt, self-extracting cap, and washers
$12.99
This is an FSA MegaExo Crank Arm Bolt for 19mm MegaExo alloy cranks
- Designed to fit alloy FSA cranks only
- Includes M12 bolt, M27 self-extracting cap, and washers
$14.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$16.00
FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander.
- Includes cap, bolt and expander
- Top assembly for carbon steerers replaces traditional top cap and star nut assembly
$25.00
The K-EDGE Road Chain Catcher is THE Original Chain Catcher used by professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia.
The K-EDGE chain catcher is a simple add-on component machined to precision which improves the overall function of your drive train and protects your valuable frame from dropped chains.
- Material: 6061-T6 CNC machined Aluminum
- Fitment: All braze-on mounted front derailleurs*
- Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs
* Not compatible with Campy EPS
* May not work with all third party braze-on adapter clamps
- Made in Boise, Idaho, USA,
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
$2.00 - $2.50
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$4.50
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC K710 and K710SL chains
- No tools needed
$6.00
- Missing links to make chain installation, maintenance and reparation easier
- Reusable up to 3 times
- Compatible with 6, 7 and 8 speed IG drivetrains
- Pin width: 7.1mm
- Card of 2
$14.00
Actuators are at the bottom of the post and convert the cable pull to open the piston, allowing the dropper to move.
$99.99
Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation.
- Fully replace the functional mechanism of KS dropper posts
- May not work with OEM dropper posts
$40.00
- Lightweight, impact resistant bashguard used on S4 and LRP chainguides
- 4-bolt, 104mm BCD only
$13.00
Replacement EBT screws close the bleed port on Magura brakes.
- Torque spec: 0.5 nM
- T25 head
$25.00
Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only.
- Sold individually
$25.00
Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only.
- Sold individually
$36.99
Replacement microSHIFT bar end shifter mounts allow you to replace broken units or convert microSHIFT thumb lever shifters to bar-end mount.
- Compatible with microSHIFT road-pull 8, 9, and 10-speed shifters only
- Expander plug compatible with handlebars with internal diameter of 19-21mm