Electronics

For optimal functionality. - Not Bosch Smart System compatible - Designed for Rail Gen 2 frames - Refer to Service Manual for assembly instructions and service

Shimano Di2 Frame Junction Box Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. It works great with computers that use a 1/4-turn twist lock interface.

SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

- The SP Connect bike bundle lets you mount your smartphone to your bike in seconds - Positions your mobile phone securely right in the center of your vision, allowing you to use your apps, access your playlists, read messages, or navigate - SPC+ Interface

Combine a SP Connect Universal Interface with the new SPC Plus system mount, where quick magnetic attachment meets our proven secure mechanical 90° twist-to-lock mechanism

Mount your bike computer directly to your ShockStop Suspension Stem. The ShockStop Computer Mount puts your Garmin, Wahoo, Cateye, Joule, Mio, Magellan, or Polar bike computer in perfect position. Two different mounting positions let you fine-tune the fit of your computer and tuck it out of the wind. Benefits: - Conveniently places your computer directly in front of your stem within easy reach - Two different mounting options let you fine-tune the position of your computer Details: - Fits ShockStop Suspension Stem only (Note: using the computer mount with the +30 degree stem will place the computer in a very upright position in line with the stem) - 2 different mounting positions (upper & lower) Compatibility: - Compatible with Garmin Forerunner QR kits - Compatible with Garmin Edge 1000 in portrait and landscape mode (upper position) and landscape mode only for lower position - Compatible with Wahoo Element and Polar in the upper position only

Position your smartphone at the perfect point for easy viewing and aerodynamics while riding with the help of the Quad Lock Out Front Mount. Featuring a strong dual-stage lock you can ride with confidence over bumps and jumps knowing that your phone isn't going anywhere your bike isn't. - Handlebar mount only, no phone case included - Compatible with handlebars 31.8mm, 25.4mm, and 22.2mm diameter - Can also be rotated for over stem mounting - Anodized aluminum mounting arm - Compatible with all Quad Lock cases and universal adapters

8-function bike computer The Protegé 8.0 bike computer is great for training, touring, or keeping track of your car-free miles. A quick glance at our buttonless computer gives you all the information that you need for darting across town or touring cross country. - Four-line, easy-to-read macromonitor LCD display provides up to five pieces of data at a glance - Heavy-duty, oversized wire harness and ultrasonically welded case ensure a durable, weatherproof unit - Mode changing is easy: push the computer forward in the spring loaded bracket- the computer is the button - Auto start/stop and LCD shut off - Fits 25.0-31.8mm handlebars - Weight: 57 grams with bracket and sensor - Case size: 40mm x 47mm - Height (w/ bracket): 27 mm

Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter

The MSW Computer Spoke Magnet is designed to fit round and bladed spokes of various diameters. - Tool-free installation - Alloy construction - Fits round and bladed spokes

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The fixed version is recommended for zero degree or negative degree stem angles. Can also be used with positive degree stems if additional spacers added (5mm to 10mm) above the stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer. - Compatibly – 1-1/8" Steerer tube Diameter, Thickness (@ Steerer) – 5mm, Length (Center-to-Center) – 50mm, - Recommended for 0 Degree to Negative Degree Stem Angles - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520, 800, 810, and Forerunner 310XT - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

The new Go Big Pro is the next generation in K-EDGE's industry leading GoPro style interface Camera Mounts. The new mounts provide easier installation with a stronger more secure platform for your action camera, available in 31.8 and 35mm options. Key Features and Benefits: - STRONG – CNC machined aluminum mount engineered to hold your camera securely in place no matter the terrain. - STABLE – High quality video footage with a solid platform to prevent shake you would get from a plastic option. - POSITION – Out front and low, the ideal location for mounting from the bars and the most popular position for on-bike footage. - EASY – Hinged handlebar clamp for ease of installation and removal. Simple 1-bolt hinged clamping system, quick and easy. - CNC Machined 6061 T6 Aluminum - Compatibility – fits 31.8mm diameter bars; all mounting hardware included; works with all GoPro HERO Original, HERO2, HERO3, and GoPro Session Cameras. Shimano CM-1000, Garmin VIRB, and Garmin VIRB X. Any action camera utilizing the GoPro interface. - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. - Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *The NEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.

The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.

Protect your Garmin Edge 510 with a form-fitting, silicone case and keep your mind at ease. Choose from a variety of cool colors to match your personal style.

THE BIKE COMPUTER MADE FOR MOUNTAIN BIKERS Edge MTB is made tough with a rugged, compact design that’s ready for long days on the trails. And new enduro and downhill ride profiles with 5 Hz GPS recording during descents mean you can see greater detail about the lines you take. - Rugged Design With Scratch-Resistant Corning® Gorilla® Glass - Up To 14 Hours Of Battery Life In Demanding Use Cases - Enduro And Downhill Ride Profiles - 5 Hz GPS Recording While Descending In Enduro Or Downhill Ride Profiles - Preloaded With Trailforks Maps And Forksight Mode - Automatically Track Split Times While Riding BUILT TO SHRED Featuring a compact, rugged 7-button design with scratch-resistant Corning Gorilla Glass, the Edge MTB bike computer can stand up to the most extreme rides. ENDURO AND DOWNHILL RIDE PROFILES The enduro ride profile tracks total ascent and descent from each run and for the ride overall. The downhill profile laps each time you finish a descent, so your return to the top via shuttle or ski lift doesn’t affect your ride stats. 5 HZ GPS RECORDING See greater detail about the lines you take down the trail with multi-band GPS with 5 Hz GPS recording while using the enduro or downhill ride profiles. UNLOCK NEW TRAIL DATA With preloaded Trailforks maps, you can dig into trail details before you ride. And get guidance along the way with Forksight mode to see the names of trails up ahead, distance, elevation, and more. SET TIMING GATES Set timing gates throughout a course to track split times and better understand your ride or race performance in real time. RIP ALL DAY LONG Edge MTB is built with long riding days in mind, with up to 14 hours of battery life in demanding use cases or up to 26 hours in battery saver mode.

Mount your Garmin Edge computer with the Quarter Turn Bike Mount. It includes the bike mount, rubber disc, and elastic bands to secure the Quarter Turn to your stem or handlebars.

Stay aware of approaching cars with Varia RTL515 rearview radar. It pairs with your Edge bike computer or compatible smartphone to alert you of vehicles approaching from behind up to 153 yards (140 meters) away. When used with your compatible smartphone, the Varia app uses bold graphics — plus tone and vibration alerts — to indicate the position and speed of approaching vehicles. MAXIMUM AWARENESS - Varia RTL515 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. MULTIPLE PAIRING OPTIONS - This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables or the optional radar display unit. WORKS WITH THE VARIA APP - This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — that indicate the position and speed of approaching cars. THIRD-PARTY APP COMPATIBLE - When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts. SUPERIOR VISIBILITY - Alert motorists to your presence as soon as possible with daylight visibility up to 1 mile. COMPACT DESIGN - Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride. PELOTON MODE - Varia RTL515 features multiple modes, including peloton mode, which provides a low-intensity flash that is kind to other cyclists’ eyes when riding in a group. BATTERY LIFE - Time spent charging is not as good as time spent riding. Get up to 16 hours of battery life in day flash mode and up to 6 hours in solid mode. Physical Specifications - Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm) - Weight: 2.5 oz (71.0 g) - Modes: solid, peloton, night flash, day flash - Lumens: 20 solid, 8 peloton, 29 night flash, 65 day flash - Battery life: 6 hours solid, 8 hours peloton, 6 hours night flash, 16 hours day flash - ANT+: Yes - BLE: Yes - Water rating: IPX7 - Viewing angle: 220° In the box: - Varia RTL515 - Mounting Kit - Cables - Documentation

With the new FAZUA 12V Car Charger, the FAZUA Battery 250 and 250 X can now also be conveniently charged in the car while on the move. For the power supply, the 12V Car Charger can be connected either to a suitable on-board power socket (in accordance with DIN ISO 4165) or to a cigarette lighter. - Charging time 3-4 hours - For Battery 250 and 250X

Convenience is calling. Answer! This bag is a must for anyone with a phone. So, everyone. Sized so your phone will stay secure even on your bumpiest rides. Keep you and your phone safe while riding. - Clear touch screen-compatible pocket fits phones up to 6.5" (16.5cm) - Velcro attachment to top tube

- For use with trainers and spin bikes only - Holds iPad Mini, Kindle Fire, Nexus 7, Samsung Galaxy 7 - Includes touch screen friendly splash-proof bag - Universal clamp attaches to all round bars up to 1.5" diameter - Viewing perspective can be set for preference - landscape or portrait - Instant removal and installation of device - Neat rubber bumpers grip and help cushion device - Mini-Tablet Holder max dimensions: - Holds devices with max dims 8.6" x 5.5" x .625" | 220 x 140 x 15mm (H x W x D)

Instant bike dashboard Enhance your riding experience while delta keeps your mobile phone safe. Whether cycling is a new hobby or you're an avid competitor, riding a mountain bike or a classic two-wheeler, this phone holder will provide full-screen visibility and hands-free access to ensure maximum safety for you AND your smartphone, while on the road! Features Mobile Phone Compatibility - Bicycle mobile phone mount compatible with phones up to 2.9 inch wide, .625 inch depth, 6 inch length (up to iPhone X and Samsung Galaxy 9 non plus + versions). Secure Mobile Phone Mounting - Weatherproof bungee and rubber inserts keep phone secure while delta’s patented cam lock provides added security for your mobile phone on rough terrain. Easily Accessible - Sliding system allows for easy in/out while on the go, stop for an important call, adjust navigation, and never worry about missing the perfect photo opportunity while riding. Multiple Mounting Options - Included handlebar and stem cap mounts allow you to position your mobile phone in your desired location. Securely mounts to handlebar diameters up to 1 3/8" / 35 mm. Quality Construction - Designed for road cycling, your mobile phone is fully enclosed and securely mounted in place with a built-in locking mechanism. Precision-engineered design grips your device, providing ease-of-mind on the roughest terrain. Weight - 0.14 lbs / 65 grams

Instant bike dashboard Perfect for any enthusiast, Delta's bicycle phone mount allows you to securely display your mobile device while riding. Using a built-in lock mechanism, your plus-sized smartphone is secured safely with multiple grip points and bumpers, to prevent shock and reduce vibration on rough terrain. Adjust the angle of display for convenient viewing while riding to easily access navigation, answer that important call or stop for the perfect photo opportunity. Features Securely Displayed - Weatherproof bungee and rubber inserts keep phone secure and protected while Delta's patented cam lock provides added security for your mobile phone on rough terrain. Compatibility - Bicycle mobile phone mount compatible with phones 3.5 inch wide x 0.5 inch depth x 7.8 inch length (up to iPhone 8+ Plus and Samsung Galaxy 9+ plus). Easily Accessible - Sliding system allows for easy in and out while on the go, so your phone is available for an important call, adjusting navigation, and you'll never have to miss the perfect photo opportunity. Quality Construction - Designed for road cycling, your mobile phone is fully enclosed and securely mounted in place with a built-in locking mechanism. Precision-engineered design grips your device, providing ease-of-mind on the roughest terrain. Multiple Mounting Options - Included handlebar and stem cap mounts allow you to position your mobile phone in your desired location. Securely mounts to handlebar diameters up to 1 3/8" / 35 mm Weight - 0.17 lbs / 80 grams

Keep your computer where you can read it with Delta's stem bolt-mounted Computer Caddy. It provides a mounting point for awkward or crowded bars. - Mounts securely using the stem bolt - Adds a space to mount up to two devices - Weight limit of 125g (0.28 pounds) per side